Lay Light
plate
Lay Light™ plates are both translucent and non-reflecting. In the translucent profile the reinforcement is clearly visible, which creates a dynamic architectural interplay.
Advantages:
• High stiffness and low weight
• High weather resistance
• Surface structure gives unique appearance
Download CAD drawings of the profile here:
| Specifications | |
|---|---|
| Surfaces | |
| Coating | UV protected, gloss according to own choice. The standard gloss is 30-35. |
| Standard colour | Natural |
| Special colours | On enquiry |
| Patina | Lay Light is a fibreglass product coated with translucent UV-lacquer, which must be expected to change over time. This patina has no effect on the construction or durability of the product. |
| Dimensions | |
| Standard width | 300 mm 400 mm 500 mm |
| Lengths | Standard 6000 mm, up to 15.000 mm on enquiry |
| Profile height | 3-12 mm |
| Weight | 5.5 kg/m2 – 22.5 kg/m2 depending of the thicknes of the plate. |
| Tolerances | Fiberline Standard |
| Properties | |
| Fire resistance | B s3, d0 (EN 13 501) B1 (DIN 4102 and ÖNORM 3800) Class 0 (BS 476) |
| Longitudal expansion | Approx. 4 mm / 6 m |
| Horizontal expansion | Approx. 2 mm / m |
| Service temperature | -20 to +80 °C |
| Test | The profiles are tested by CSTB (Centre Scientifique et Technique du Batiment, Paris) For wind load (up to 6.539 Pa), fatique, earthquake, an impact (among others according to hailtest VKF No. 26 247, class HW5/HW5) |
